Commonly there are two categories of actuators: Thermal or Electrical. Thermal actuators are slow reacting as they are driven by an electric heated wax element. Electrical actuators, which are motor driven, are somewhat faster.
For the FlowCon Energy FIT System we offer the standard Electrical SM actuators for the PICV (SM.0.0.0.3 and SM.0.0.0.4).
As baseline, all FlowCon actuators are supplied normally closed (NC) and normally open (NO) versions are either available upon request or the change from NC to NO is a built-in feature. Common for most of our actuators is the fact that actuator and valve are developed as a pair to achieve optimal control function.
In addition, the essential Intelligent Interface is required as core data collector and data receiver and communicates with the PICV actuator, the BMS system, the temperature sensors and pressure sensors as well as - via Bluetooth® - to the FlowCon App providing full data on ΔT, ΔP, Flow and Energy.
New FlowCon Green High Flow
FlowCon expands the Green range with a 20 mm high flow insert. Available max.flow is up to 0.736 l/sec, an increase of 140% compared to Green.1.
Sheremetyevo Airport, Terminal C, Moscow, Russia
Are you travelling to Moscow ? Then you will come across FlowCon even though you may not notice it, but FlowCon valves will guarantee optimal indoor…