
FlowCon introduces the Next-Generation-Version of the FlowCon EVS-Insert, item no. EVS.0.0.0.
Naturally, the new FlowCon EVS-insert will fit in the same valve bodies as the previous one, i.e. A15/20/25, AB15/20/25 and ABV1 (DN15/20/25) and apply with the same range of actuators (EV.0.2-EV.0.5).
The new EVS-insert is launched to make fitting and particularly re-fitting of a new stainless steel cartridge easy.
When applying the stainless steel cartridge in the new FlowCon EVS-insert, please make sure that the cartridge o-ring is placed on the inside groove at the top of the EVS-insert before inserting the cartridge (photo 1 and 2). Hereafter the cartridge is easily inserted with a hard push (photo 3). Screw on the lock ring (photo 4 and 5) and the cartridge is correctly fitted. Then insert the EVS-insert into the valve body.
For exchange of the stainless steel cartridge, the procedure is simply reversed. Unscrew the lock ring and pull out the cartridge. The cartridge o-ring will also come out. Insert the new o-ring and afterwards insert the new stainless steel cartridge as described above.
FlowCon 最新新闻
显示所有新闻
New massive T4 at Urumqi International Airport, China
Precise control, easy commissioning, scalability, efficiency, and lower operating costs is why FlowCon was selected
FlowCon publishes yet another EPD – now for PICV-actuators
The EPD covers the FlowCon FN, FH, FT, and SM ranges
Sustainability and PICVs
Sustainability in HVAC is no longer optional - it is fundamental to responsible system design
Upgraded actuator range for FlowCon Unimizer®
FlowCon launches upgraded B-actuators for DN15-80 Unimizers® and T-actuators for DN100-150 Unimizers®