Expo 17 Building, Kazakhstan

Origin, Serviceability, Performance, reliability and monitoring. FlowCon International was one of the only companies capable of providing such under a complete package.

Origin: All products were required to be 100% European/USA origin, including subcomponents. Materials for each process were required for documentation and to make sure it has the best quality.

Serviceability: The FlowCon International products that are supplied are modular built and can be disassembled for service without removing the valves from the pipeline. Spare parts can furthermore be purchased and replaced by the local distributor or by staff from the FlowCon International office.

Performance: Each insert is manufactured to deliver a specific flow rate over a wide operating range of differential pressures at a tolerance of +/-5%. This is done by automatically adjusting the open orifice area of the insert in reaction to change in pressure. For instance a 150 mm (6”) wafer containing four inserts i.e two at 4.00 l/sec and two at 5.05 l/sec, will have a total flow rate of 18.1 l/sec.

Reliability: The FlowCon wafers and valves had been installed in buildings globally for more than 10 years at the time of order.

The flow rate inserts are calibrated for water at approximately 16 degrees Celcius.