FlowCon launches upgraded version of the
B- and T-Actuators

FlowCon launches new and improved versions of the electrical actuators B- and T-versions. The new actuators will match the full FlowCon Unimizer^® valve range.

The updated versions include:

Upgraded Modulating versions:

Comes now with settable control signal and the settable choice of 2-10V, 0-10V or 4-20mA.
As standard all modulating versions are now also with feedback signal, also settable to 2-10V, 0-10V or 4-20mA.

3-Point floating and 2-Position versions:

Come as 24V or 120/240V.

Settable rotation direction:

Easy DIP switch setting for either clockwise (CW) or counter clockwise (CCW) rotation.

Status LED:

If required, status LEDs are immediately available under the actuator cover. They show operation mode and alarms, if any.

End switches:

Auxiliary switches are now available as a plug on module – one module for the full B-actuator range and one module for the full T-actuator range. Simple to install, set and use.

QR code:

Each actuator is with a QR code on the actuator cover for easy onsite access to literature.

Actuator range:

• B-actuators for Unimizer® 2-way and 3-way DN15-80:
  • B.0.2 (modulating)
  • B.0.3 (3-point or 2-position 240V) and
  • B.0.4 (3-point or 2-position 24V)
  • B-Aux (auxiliary switch plug on module)
• T-actuators for Unimizer® 2-way and 3-way DN100-150:
  • T.0.2 (modulating)
  • T.0.3 (3-point or 2-position 240V or 120V) and
  • T.0.4 (3-point or 2-position 24V)
  • T-Aux (auxiliary switch plug on module).